List of Cheat Codes

fb1280x1024

bfx2 with framebuffer at 1280x1024 - for older systems and notebookds

fb1024x768

bfx2 with framebuffer at 1024x768 - for older systems and notebookds

fb800x600

bfx2 with framebuffer at 1280x1024 - for older systems and notebookds

failsafe

bfx2 without DMA, SCSI, APM, USB, Firewire, AGP, DHCP, MCE and VESA for graphics

lang={cs,de,en,es,fi,fr,it,hu,nl,ru}

Language of choise, default: "us"

tz=Europe/Berlin

Choose timezone

screen=1280x1024

Use specified screen resolution for X (supply your correct resolution)

vrefresh=60 | vsync=60

Use 60 Hz vertical refresh rate for X (use alternatively!)

xhrefresh=80 | hsync=80

Use 80 kHz horizontal refresh rate for X (use alternatively

myconf=/dev/sda1

Load "bea.sh" from the partition specified

vga=normal

Non-framebuffer mode, but with X

no{apic,agp,apm,audio,ddc,dhcp,fstab,firewire,pcmcia,scsi,swap,usb}

Skip parts of HW detection (use in case of problems)

toram

Copy CD to RAM and run from there (needs a considerable amount of RAM!)

tohd=/dev/hda1

Copy ISO to HD partition and run from there

fromhd

Skip checking for the ISO on CD-ROM and try booting from HD

fromhd=/dev/hda1

Boot from previously copied CD image

bootfrom=/dev/hda1

Access image then boot from previously copied CD-Image (enables booting from NTFS / ReiserFS)

bootfrom=/dev/hda1/forum.iso

Access image, boot from ISO image

scsicd

Use SCSI emulation for IDE CD-ROMs

hostname=BeaFanatIX

Overrides default hostname "dargo"

gmt

Use GMT-based time

dma

Enable DMA acceleration for all IDE drives

2

Runlevel 2, textmode only

myconf=scan | config=scan

Try to find "bfx2.sh" automatically (use alternatively!)

pnpbios=off

No PnP BIOS initialization

acpi=off

Disable ACPI BIOS completely

usb2

Try to initialize USB 2.x controller(s)

pci=irqmask=0x0e98

Try this if PS/2 mouse doesn't work

pci=bios

Workaround for bad PCI controllers

ide2=0x180 nopcmcia

Boot from PCMCIA CD-ROM (for some notebooks)

mem=128M

Specify memory size in MByte

nowheelmouse

Force plain PS/2 protocol for PS/2 mouse